26
Maintenance
Cleaning
Many household cleaners contain abrasives and chemical substances, and should not
be used for cleaning plated or plastic fittings. These finishes should be cleaned with
a mild washing up detergent or soap solution, and then wiped dry using a soft cloth.
Spray Plate Assembly - External
1.
Use your thumb or a soft cloth to wipe
any limescale from the soft rubber
nozzles and the front face of the
spray plate assembly.
Spray Plate Assembly - Internal
1.
Remove the spray plate assembly.
Refer to
Maintenance: "Spray Plate
- Removal and Installation”.
2.
Remove the inner and outer nozzle
ring retainers.
3.
Clean all the components with a stiff
brush. If necessary use a plastic
kettle descalent in accordance with
the manufacturer's instructions. Flush
thoroughly with water before the
shower is used.
4.
If necessary replace the 'O' seals.
Refer to
Spare Parts
on Page 28.
5.
Refit the components in reverse order.
Make sure the 'O' seals, and the
inner/outer nozzle ring retainers are
fitted correctly. Refer to
Maintenance:
"Spray Plate - Removal and
Installation".
Adjuster
Ring
Spray Plate
Assembly
Handset Body
Assembly
Outer Nozzle
Ring Retainer
Inner Nozzle
Ring Retainer
'O' Seals