13
3.
With the clamp bracket button
FULLY
depressed carefully ease the slide
bar through the hole in the clamp
bracket. Take care not to dislodge
the constant friction mechanism or
the friction pad. Release the clamp
bracket button.
4.
Slide the hose retaining ring onto the
slide bar below the clamp bracket.
5.
Ensure the slots in the slide bar are
aligned with the lugs in the support
and fit the two slide bar supports to
the ends of the slide bar. Ensure each
support is pushed firmly home.
6.
Select one of the opposing pair of
screw slots on the slide bar supports
(i.e. one slot on the top support and
one on the bottom support) and fix the
slide bar assembly securely to the
wall.
7.
Mark the position of the two remaining
screw fixing holes.
Warning!
Ensure there are no buried
cables or pipes in the wall before
drilling.
8.
Remove the slide bar assembly and
drill the 8 mm holes for the two extra
fixing screws and insert the wall plugs
supplied. (Alternatively use proprietary
cavity fixings for dry lined, stud
partition, shower cubicle or laminated
panel walls).
9.
Secure the bottom slide bar support
to the wall using the screws provided.
Ensure the screws are fully tightened.
10.
Loosely screw the top slide bar
support to the wall. Press firmly down
on the top slide bar support and, while
continuing to apply force, fully tighten
the screws.
11.
Fit the end caps to the slide bar
supports.
Clamp Bracket
Slide Bar
Constant Friction
Mechanism and
Friction Pad
Fully Depress the
Clamp Bracket Button
End Cap
Bottom Slide Bar
Support
End Cap
Top Slide Bar
Support
Slide Bar
Clamp
Bracket
Assembly
600 mm
27 mm
Wall Plugs
Fixing Screws
27 mm
Hose
Retaining
Ring