Spirolab
Rev.1.8
Page 26 of 60
At the end the main screen will appear
To turn
spirolab
off, press the power button on the front of the unit.
WARNING
Spirolab does not turn off completely but enters an ultra-low standby mode; some
features remain active to allow the device to keep the date and time updated and to
be activated remotely if required. For this reason, the power key's symbol is
,
corresponding to the standby mode.
2.2
Saving energy
The internal battery pack charge is shown in the upper right hand corner of the display by
the symbol:
If the battery symbol is all green, then the battery pack is charged.
WARNING
To charge the battery pack, only use the charger supplied by the manufacturer.
