Spirolab
Rev.1.8
Page 5 of 60
Before using your spirolab…
•
Carefully read the user manual, the labels and all the information supplied with the device
•
Configure the device (date, time, assigned values, language etc.) as described in section
2.5
WARNING
Before connecting spirolab to a PC, install the winspiroPRO software supplied with
the device.
Once the software has been correctly installed, connect the device to the PC; a
message will appear that confirms the recognition of a new peripheral device.
Keep the original packaging!
In the event of a problem with the product, use the original packaging and send it to your
local distributor or to the manufacturer.
If the device is being sent for repair, the following rules apply:
•
Goods must be sent in their original packaging;
•
Costs involved in sending the product are at the sender's expense.
Manufacturer's address
MIR SRL
Via del Maggiolino, 125
00155 ROMA (ITALY)
Tel + 39 0622754777
Fax + 39 0622754785
Email: [email protected]
MIR USA, Inc.
5462 S. Westridge Drive
New Berlin, WI 53151 - USA
Tel + 1 (262) 565
–
6797
Fax + 1 (262) 364
–
2030
Sito web: www.spirometry.com Email:
MIR implements a policy of constant product improvement and the technology we
use is in a state of continuous evolution. For this reason, the company reserves the
right to up-date these instructions if necessary. If you have any suggestions that you
consider useful, please send an e-mail to the following address:
[email protected]. Thank you.
MIR does not accept any responsibility for any harm or damage caused by users
failing to follow the instructions or failing to heed the warnings in this manual.
Total or partial copying of this manual is forbidden.
