Minolta PI4700E, Руководство пользователя, Страница: 348 / 426

Unable to Print 11
Pi4700e 11-5
T
ro
ubl
es
hoo
ting
Ch
apte
r 11
Folding cannot be
specified. (for Windows)
The optional Folding Finisher is
necessary for you to specify
Folding. “Folding Finisher” must
be selected on “Device Options
Setting” tab.
Select “Folding Finisher” on “De-
vice Options Setting” tab.
(for Macintosh)
The optional Folding Finisher is
necessary for you to specify
Folding. “Folding Finisher” must
be selected on “Installable Op-
tions.”
Select “Folding Finisher” on “In-
stallable Options.”
Folding may be disabled when
Staple or Punch is specified. Check the settings made. (See
“Function combination matrix”
(p. 12-1, p. 12-4, p. 12-7).)
Folding is not effect-
ed. Folding cannot be effected if the
type of paper is Thick Paper or
OHP. Check the type of paper.
Unable to print image
properly. Machine memory space avail-
able is not sufficient. Add machine memory to expand
its space, or simplify the image
to reduce the amount of data
handled.
Unable to specify the
exit port. No exit port can be specified if
the paper size is A6 or B6, or
OHP Interleaving is specified. Check the setting of the paper
size and OHP Interleaving.
Unable to properly
feed prints out to the
specified port. Prints with paper size of B6 or
smaller cannot be fed out if pa-
per exit port is Mailbin. Check the paper type and paper
size.
Paper is not fed from
the specified paper
source. Paper may not be fed from the
specified paper source if that pa-
per source is loaded with paper
of a different size and direction. Load the paper source with pa-
per of the appropriate size and in
the appropriate direction.
Watermark is not
printed. Watermark may not be printed in
graphics applications. No watermark can be printed in
this case.
Unable to print exact-
ly as set. The paper size, paper direction,
and other settings made on the
application takes precedence
over those made in the driver. Make the correct settings on the
application.
Error dialog box is
output instead of Set-
ting dialog box. Unusable combination of device
and settings with Easy Set being
stored could have been
achieved by changing of device
installed. Open file specified in the error
dialog box, delete applicable set-
tings.
Distribution cannot
be specified. To specify Distribution, a “Hard
Disk Drive in Copier” that is op-
tional on the machine is neces-
sary. “Hard Disk Drive in Copier”
must be specified in “Device Op-
tions Setting.” Select “Hard Disk Drive in Copi-
er” on “Device Options Setting.”
Symptom Possible Cause Action