Minolta PI4700E, Руководство пользователя, Страница: 261 / 426

8 Using the utility software
8-30 Pi4700e
Netw
or
k
I
n
ter
fa
c
e
Car
d
Chap
ter
8
✎
Note
The maximum number of hops value defines the maximum number of
subnetworks the program searches for Network Cards. When a value
of zero is set here, the search does not include any subnetworks to
which the computer is connected. A value of 2 searches all networks
that can be accessed through no more than two routers. Specifying a
value of 15 or greater automatically detects all connected Network
Cards, but such a high setting greatly increases traffic, and so it is not
recommended.
After the settings are the way you want, click the OK button to apply them
and close the dialog box.
Running MAP
1
On the Start menu, point to Programs and then Map .
2
On the submenu that appears, click MAP .
3
A list of Network Cards found by MAP appears on a Web browser
page.
4
Click the URL or the serial number of the Network Card whose settings
you want to change.
5
This displays a Web page for managing the printer where the Network
Card is installed. You can use the Web page to make various Network
Card settings. See “10 PageScope Light” for more information.