Minolta Magicolor 2200, Руководство пользователя

Страница: 48 / 200

Loading Media 40
Loading Media
Take off the top and bottom sheets of a ream of paper.
Holding a stack of approximately 250 sheets at a time,
fan the stack to prevent static buildup for the paper
before inserting it in a tray.
Attention
Always load the media short edge first.
Attention
Do not mix media of different sizes, types, or weights, as this will cause
printer jamming.
When refilling media, first remove any media remaining in the tray. Stack it with the
new media, even the edges, then reload it. Although the magicolor 2200 DeskLaser
was designed for printing on a wide range of media types, it is not intended to print
exclusively on a single media type except plain paper. Continuous printing on media
other than plain paper (such as envelopes, labels, thick stock, or transparencies) may
adversely affect print quality or reduce engine life.
For media other than standard plain paper or transparencies, both the driver (Paper
tab, Paper Type option) and the MP Size key on the control panel need to be selected.
It is important to use the MP Size key to set the multipurpose tray to the appropriate
media size in order to obtain optimum printing results.
Autoduplexing
Duplex (2-sided) printing can be done automatically with the optional duplex unit
installed.
Only up to 28 lb bond (105 g/m²) plain paper can be duplexed.