Minolta DYNAX 7, Руководство по ремонту, Страница: 43 / 66

(2181) 43
REP
AIR GUIDE
■ ■ ■ ■ ■
Fig.3 Fig.3 Fig.3 Fig.3 Fig.3
■ ■ ■ ■ ■
Fig.1 Fig.1 Fig.1 Fig.1 Fig.1
■ ■ ■ ■ ■
Fig.2 Fig.2 Fig.2 Fig.2 Fig.2
1,955mm 1,955mm
1,955mm 1,955mm
1,955mm
① ① ① ① ①
AF Area Adjustment
Adjustment
1. Set up the equipment as in Fig. 1.
2. Select "AREA ADJ." from the main menu and press SELECT Button.
3. Press and hold Shutter-release Button partway down after Naviagation Display goes out, so that lines
with two dents and a value appear in the display and remain for 3 sec.
Check that each line has two dents like the ones in Fig. 2, and reading is within the standard.
If not, adjust as follows.
4. Adjust the sub-mirror position using TORX L-Wrench as in Fig.3.
5. Repeat step-3 and -4 until the reading is within the standard.
6. Press SELECT Button while pressing and holding Shutter-release Button partway down (S1 ON) to
return to the previous menu.
AF Chart-III for 2163 AF Chart-III for 2163
AF Chart-III for 2163 AF Chart-III for 2163
AF Chart-III for 2163
5th 5th
5th 5th
5th
4th 4th 4th 4th 4th
6th 6th 6th 6th 6th
7th 7th
7th 7th
7th
8th 8th
8th 8th
8th
2nd 2nd 2nd 2nd 2nd
3rd 3rd
3rd 3rd 3rd
1st 1st 1st 1st 1st
TORX L-Wrench TORX L-Wrench TORX L-Wrench TORX L-Wrench TORX L-Wrench
AF Master Lens AF Master Lens AF Master Lens AF Master Lens AF Master Lens
Lens mount surface Lens mount surface Lens mount surface Lens mount surface Lens mount surface
Camera Camera
Camera Camera
Camera
Focus mode: MF Focus mode: MF Focus mode: MF Focus mode: MF Focus mode: MF
Stanndard:96-104
Align center of each island with the chart. Align center of each island with the chart. Align center of each island with the chart. Align center of each island with the chart. Align center of each island with the chart.