Minolta DYNAX 7, Руководство по ремонту, Страница: 3 / 66

(2181) 3
REPAIR GUIDE
aaaaa
bbbbb
■ ■ ■ ■ ■
Fig. 2 Fig. 2 Fig. 2 Fig. 2 Fig. 2
To inhibit flash charge
Be sure to make flash charge available after repair.
1. Set up the camera as Fig. 2.
2. Select ASSIST MODE from main menu and press SELECT Button.
3. Select FLASH CHARGE ON/OFF from assist mode menu and press SELECT Button.
4. Press Shutter-Release Button partway down.
5.Press Button-A or -B to select flash charge on/off. And press SELECT Button.
Button-A: ON (flash charge available)
Button-B: OFF (flash charge inhibited)
6. Press Shutter-Release Button partway down. HIT Controller beeps.
7. Re-install Battery.
Select MENU and press SELECT Button to return to the assist mode menu.
To activate without exterior parts
Short-circuit the pattern -a of I/O FLEXIBLE ASSY with solder.
When using replacement I/O FLEXIBLE ASSY, no need to short these patterns because it has pattern-b.
*Before installing BACK COVER ASSY, be sure to unsolder the pattern-a or to cut the pattern-b.
Cut Cut Cut Cut Cut
ROM Pack for 2181 ROM Pack for 2181
ROM Pack for 2181 ROM Pack for 2181
ROM Pack for 2181
HIT Controller HIT Controller
HIT Controller HIT Controller HIT Controller
HIT I/F Box HIT I/F Box HIT I/F Box HIT I/F Box HIT I/F Box
Contact Jig Cable Contact Jig Cable Contact Jig Cable Contact Jig Cable Contact Jig Cable
Contact Jig for 2181 Contact Jig for 2181 Contact Jig for 2181 Contact Jig for 2181 Contact Jig for 2181
I/O FLEXIBLE ASSY I/O FLEXIBLE ASSY
I/O FLEXIBLE ASSY I/O FLEXIBLE ASSY
I/O FLEXIBLE ASSY
Connection Connection Connection Connection Connection