Minolta DiMAGE Scan Multi PRO AF-5000 Скачать руководство пользователя страница 94

Страница: 94 / 130

SCAN SETTINGS

Enter the desired input/output resolution from
the input and the output resolution drop-down
list.

• Values can also be entered into the output resolution list

box directly.

Input Resolution list box
The value with “#” is the default setting.
< When selecting 35 mm or Multi Format 35mm >

4800/2400/1600/#1200/800/600/480
(When inputting value directly, the desired value from
300 to 4800 is available.)

< When selecting 6x4.5, 6x6, 6x7, 6x8, 6x9 or Multi

Format 6x9 >
4800/3200/2400/1600/1200/#800/600/400/320
(When inputting value directly, the desired value from
200 to 4800 is available.)

Output Resolution list box
The value with “#” is the default setting.

2400/1440/1200/800/720/600/400/360/350/#300/240/
200/180/150/96/72/36
(When inputting value directly, the desired value from
36 to 2400 is available.)

• When “pixel” is selected in the Unit list box, the output

resolution cannot be selected or specified.

The dimensions of the cropping frame are
displayed in the input size text boxes.

• Values can be entered directly or by resizing the

cropping frame.

• The values will change if a different unit of measure is

selected.

• The scanning area size can't be changed if the Input

Size is locked.

Enter the desired output size (maximum 3
digits).

• The output size is limited by the maximum resolution

of the scanner.

• The values will change if a different unit of measure is

selected.

• The output size cannot be changed when the unit list

box is set to pixels.

• The scanning area size can be changed

proportionally (within the resolution limits) when the
Output Size is locked.

The input scan resolution text box is set to
the lowest input (scan) resolution necessary
to achieve the desired output size and resolution.

Input scan resolutions can also be selected from the drop
down list or entered directly.

• Click on

to lock the

settings. The icon will

change to

. Click again

to unlock.

• The magnification text box

displays the output/input

size ratio as a percentage.

• Magnification values can be

entered directly

• Unit list box allows you to

select the unit of Input size

and Output size from the

following units displayed in

the list box.

The value with

“#” is the default setting.

#pixel/mm/cm/inch/pica/point

Содержание DiMAGE Scan Multi PRO AF-5000



































































































































Результаты поиска

Содержание DiMAGE Scan Multi PRO AF-5000

Отзывы:

Бренды по названию

Популярные бренды

Minolta DiMAGE Scan Multi PRO AF-5000, Инструкция по эксплуатации

Результаты поиска

Содержание DiMAGE Scan Multi PRO AF-5000

Отзывы:

Бренды по названию

Популярные бренды