manualshive.com logo in svg

Minolta DiMAGE Scan Multi PRO AF-5000, Инструкция по эксплуатации

Поделиться
Скачать
Minolta DiMAGE Scan Multi PRO AF-5000 Скачать руководство пользователя страница 32

32

LOADING THE FILM HOLDER

SLIDE MOUNT HOLDER SH-P1

• The slide mount holder SH-P1 can hold up to 4 mounted

slides (35mm).

• Slide mounts must be thicker than 1mm and thinner than

2mm to fit properly into the holder.

• Blow dust off the slide before placing it into the film holder.

1.

Position the slide mount holder
SH-P1 so the white arrow is on the
top-left side, then open the slide
mount.

• Open the slide holder by pulling up the

tab from underneath.

2.  Place the slides within the

indentations, making sure they lie
flat.

• Insert the slides emulsion side down.

3.  Press the cover firmly closed until

it clicks.

• With the fourth frame of the slide mount

holder, you can change slides without
removing the slide mount holder from the
scanner. A prescan should be made with
each new slide when using the AF and AE
function (page 29).

• Do not scan glass

mounted slides. Glass

mounts bend the light from

the line scanner

, causing

bad results.

Содержание DiMAGE Scan Multi PRO AF-5000



































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды