8
Working with the printer
8-6
8.3
Loading media
Loading media in Tray 1
Note the following points:
✔
Refill the tray only when it is completely empty.
✔
Refer to the advice on loading media on page 8-1.
1
Remove the tray cover.
2
Squeeze the right media guide and
open the media guides.
3
Place the media in the tray.
?
How many sheets of paper may
I place on the tray?
➜
Tray 1 has a capacity of 250
sheets of plain paper. The stack
of paper should not rise above
the media limit mark.
?
How is letterhead fed in?
➜
Load letterhead with the side to
be printed facing up and the preprinted letterhead at the top (facing
the printer).
?
What if I am loading legal-size paper?
➜
Open the cover at the front of the tray.
4
Squeeze the right media guide and adjust the media guides so that
both the left and right sides of the media are secure.
5
Replace the tray cover.
