MINN KOTA 1862014, Руководство по установке

Страница: 2 / 10

Fortrex Ultrex Maxxum Edge
Inboard Inboard Inboard Inboard Inboard Inboard
The MKA-42 and MKA-52/62 are designed to be compatible with
the Ultrex, Fortrex, Maxxum and Edge Minn Kota ® motors. The
base extrusion or mounting bracket of the trolling motors may vary.
Please note the appearance of the applicable trolling motors and
mounting brackets. For a complete list of motors compatible with
the MKA-42 and MKA-52/62, please refer to the website at minnkotamotors.com.
Inboard Inboard
INSTALLATION
Installing the Slide Plate to Maxxum Motors
a. Take the Slide Plate (Item #10) and align the
mounting holes on the plate with the mounting holes
on the motor mount. The mounting holes closest to
the short edge of the plate should face outboard.
Motor Motor
Mount Mount
Socket Head Socket Head
Screw Screw
Inboard Inboard
Outboard Outboard
Slide Slide
Plate
Plate
Nylock Nut Nylock Nut
NOTICE:
Place the stabilizer strap (if included with your
motor) between the motor mount and the Slide Plate. For
full function, the strap should be located between the
middle pair and most-inboard pair of mounting screws.
ITEM(S) NEEDED
1
#8 x 6 #10 x 1 #6 x 6
b. Using a #3 Screwdriver, fasten the Motor Mount
to the Slide Plate with six ¼” X 2¼” Socket Head
Screws (Item #8) and six Nylock Nuts (Item #6).
The Screws should pass through the Motor Mount
and Slide Plate and be secured by a Nylock Nut.
Stabilizer Stabilizer
Strap Strap
1b
NOTICE:
Images are a graphical representation and may
vary from your motor.
2 | minnkotamotors.com ©2020 Johnson Outdoors Marine Electronics, Inc.