MiniTrencher GeoRipper GR16, Инструкция по эксплуатации и безопасности

Страница: 8 / 20

ASSEMBLY INSTRUCTIONS
Before assembly, check parts list within product packaging. If anything is missing, please call
MiniTrencher or your local dealer immediately.
1. Removed powerhead from box and lay on its side on a non-marring surface. Position so
the digging bar bolts are visible. (Fig. F)
Using the 18mm wrench provide, undo and set aside the digging bar clamping bolts, lock
washers and bar clamp.
2. Hold the digging bar as shown (Fig. G) with the slot on the bar facing towards the main
block of the GeoRipper® minitrencher.
CAUTION: DIGGING BAR IS REVERSIBLE BUT DIGGING CHAIN DIRECTION IS CRITICAL
(Fig. H)
Fig. F
Fig. G
Fig. H
3