MiniTrencher GeoRipper GR16, Инструкция по эксплуатации и безопасности

Страница: 14 / 20

GUIDE TO MAINTAINING DIGGING COMPONENTS
IMPORTANT!
Digging Components wear depending on soil, digging depth and operator.
Estimates are provided, but not guaranteed.
• Reverse digging bar as required. Estimate is every four digging chains.
• Replace digging bar when bar is worn on both sides.
• Replace nose bearing as required. Estimate is every three to four digging chains.
• Replace nose sprocket as required. Estimate is every six to eight digging chains.
• Replace digging chain drive sprocket as required. Estimate is every three to four
digging chains.
When finishing work, it is advisable to clean the digging chain and spray lightly with WD40, or
similar, to prevent corrosion while in storage. For long term storage, the digging chain should
be removed and soaked in a light oil or diesel fuel. Clean other surfaces with a brush or damp
cloth. Avoid using petroleum-based products, abrasives, or other solvents on labels. Remove
the drive belt guard, remove dust and dirt from belt housing and reinstall. Store the
GeoRipper® minitrencher is a safe, dry place.
9