MiniTrencher GeoRipper GR16 Скачать руководство пользователя страница 17

Страница: 17 / 20

SERVICE AND PARTS

GeoRipper® minitrenchers are professionally designed and engineered for easy service and

part replacement.
During the warranty period, any non-routine servicing shall be referred to MiniTrencher’s

service department or an authorized MiniTrencher service center to maintain warranty status.

This work will be charged at the normal rates unless found to be a warranty item. Beyond the

warranty period, replacement parts can be ordered through MiniTrencher and its dealers for

convenient field replacement.

WARNING!

Unauthorized parts and modifications not only void the warranty, they can be dangerous,

causing serious or fatal injury to operator or bystanders.

Only use genuine GeoRipper® minitrencher parts.

When ordering parts, accessories or service, please quote:

•

The GeoRipper® minitrencher model number. (GR16, GR20, GR27)

•

Powerhead manufacturer and model number.

•

The GeoRipper® minitrencher number. (stamped on the bar mounting block)

REPLACEMENT PARTS FOR GEORIPPER® MINITRENCHER

Bar Accessories

GR1

Bar End Set

GR2

6-Tooth Nose Sprocket

GR2-11 11-Tooth Nose Sprocket

Digging Bars

GR3-16 16” (400mm) Digging Bar

GR3-20 20” (500mm) Digging Bar

GR3-27 27” (800mm) Digging Bar

GR3C-16 16” (400mm) Digging Bar w/ GR1, GR2

GR3C-20 20” (500mm) Digging Bar w/ GR1, GR2

GR3C-27 27” (800mm) Digging Bar w/ GR1, GR2-11

Digging Chains

GR4-16 16” (400mm) Digging Chain 2-Pack

GR4-20 20” (500mm) Digging Chain 2-Pack

GR4-27 27” (800mm) Digging Chain 2-Pack

Accessories

GR6

Bar Clamp Washer Only

GR8

Dirt Guard Ext. Kit

Conversion Kits & Accessories

GRP6102 Drive Sprocket Makita EK6101

GRP7602 Drive Sprocket Makita EK7651H/EK8100

GRPH7602 Drive Sprocket for Husqvarna K760/K970

GRPS7602 Drive Sprocket for Stihl TS700/TS800

EZ Kart™

GR EZM EZ Kart™ Makita

GR EZH EZ Kart™ Husqvarna

GR EZS

EZ Kart™ Stihl

EZ Kart Accessories

GRPEZ08 Throttle Cable

GRPEZ10M Throttle Latch (No Cable) Makita

GRPEZ10H Throttle Latch (No Cable) Husqvarna

GRPEZ10S Throttle Latch (No Cable) Stihl

GRPEZ12 Handle Clip

GRPEZ14 Wheel Washer & Clips

GRPEZ16 Wheels

GRPEZ18 Pull Strap

GRPEZ20 Pull Strap Buckle

GRPEZ26 Axle Extender

GRPEZ27 Axle Extender Clip

GRPEZ28 Rock Shield Kit

Содержание GeoRipper GR16





















Результаты поиска

Содержание GeoRipper GR16

Отзывы:

Похожие инструкции для GeoRipper GR16

Бренды по названию

Популярные бренды

MiniTrencher GeoRipper GR16, Инструкция по эксплуатации и безопасности

Результаты поиска

Содержание GeoRipper GR16

Отзывы:

Похожие инструкции для GeoRipper GR16

Бренды по названию

Популярные бренды