background image

51 

 

MINIMIZER LLC

LIFETIME WARRANTY

LIMITED WARRANTY AND LIMITATION OF REMEDIES.

GENERAL TERMS.

A.1  For products, components or product categories identified in Section 2 below only, Minimizer LLC. warrants that such specifically identified 

products, components, or product categories will be free from defects in materials and workmanship at the time of delivery and for the 

applicable warranty periods stated in Section 2 for each product, component or category. All warranties are subject to the “Warranty Conditions 

and Limitations” described in Section 3 and to any additional conditions or limitations listed in Section 2 for each product, component or 

category. The warranties stated herein are in lieu of all other warranties, obligations or liabilities on the part of Minimizer LLC.. Minimizer LLC. 

does not authorize any other person or party to: (i) act on its behalf in connection with any warranty claim or warranty work (except pursuant to 

a written authorization signed by Minimizer LLC. authorized representative), (ii) modify or expand Minimizer LLC. product-specific warranty(ies), 

or (iii) assume any warranty obligation or liability on behalf of Minimizer LLC. concerning its products.

A.2  Minimizer LLC. MAKES NO OTHER WARRANTY, EXPRESS OR IMPLIED, EXCEPT AS ARE SPECIFICALLY SET FORTH IN THIS DOCUMENT.  

Minimizer LLC. MAKES NO IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR 

PURPOSE AND Minimizer LLC. SPECIFICALLY DISCLAIMS ALL SUCH WARRANTIES.  IN NO EVENT WILL Minimizer LLC. BE LIABLE FOR AN AMOUNT 

IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT(S) FOR ANY LOSS OR DAMAGE, WHETHER DIRECT OR IN-DIRECT, INCIDENTAL, CONSE-

QUENTIAL, OR OTHERWISE, INCLUDING, BUT NOT LIMITED TO, LOST PROFITS OR PUNITIVE DAMAGES ARISING OUT OF THE ALLEGED FAILURE 

OF OR DEFECT IN Minimizer LLC. PRODUCT.

A.3  You must return any product for which a defect is claimed to Minimizer LLC. in accordance with Minimizer LLC. then-current policies. 

Contact Minimizer LLC. at its customer service number: 800-248-3855 or visit https://www.minimizer.com for further instructions. If Minimizer 

LLC. determines that that product failure has occurred within the applicable warranty period and is a result of a defect in materials or workman-

ship, a corrective action will be assigned and a Customer Service Representative will contact you regarding the warranty fulfillment process.  

Minimizer LLC. reserves the right, at its sole option, to satisfy its warranty obligations by repairing the product at Minimizer LLC. expense, 

replacing the product, tendering the product to the original manufacturer or component manufacturer for the fulfillment of an applicable 

warranty, refunding the purchase price, or some combination of these.

PRODUCT SPECIFIC TERMS.

The following terms modify Minimizer LLC. general terms stated above in Section 1 for each specific product, component, or category listed in 

this Section 2. Please read this Section carefully and familiarize yourself with the specific warranty terms for the products you have purchased.

F  Seats – Limited Lifetime Warranty.

F.1  Certain Mechanical Components. Minimizer LLC. warrants that the suspension system, controls, heating element, cooling components, and 

revitalizing components of Minimizer™ seats will be free from defects in materials and workmanship at the time of delivery and for the useful 

life of the product, subject to the Warranty Conditions and subject to the additional limitations stated below.

F.2  Seams and Other Components. For all other components, Minimizer LLC. warrants that the products will be free from defects in materials 

and workmanship at the time of delivery and for a period of (1) one year.

WARRANTY CONDITIONS AND LIMITATIONS.   The following limitations and conditions (the “Warranty Conditions”) apply to all Minimizer LLC. 

warranties including each product, component or category specific warranty contained in Section 2:

A.1  No warranties shall apply if Minimizer LLC. determines that the final product configuration or installation at any time exceeded Minimizer 

LLC. recommended structural limits, weight or length restrictions, guidelines, or instructions for use, as published by Minimizer LLC. at the time 

of purchase.

A.2  No warranties shall apply to any products that were installed in contravention of Minimizer LLC. installation guidelines or instructions listed 

at the time of installation, including, but not limited to, use of any unauthorized hardware, tools, fasteners, supplies or installation methods.

A.3  No warranties shall apply if Minimizer LLC. determines that the applicable product or component was used on a vehicle manufactured 

outside of accepted manufacturing practices.

A.4  No warranties shall apply if Minimizer LLC. determines that the applicable product or component was damaged as a result of occurrences 

outside of ordinary operating conditions, or as a result of an accident or collision not caused by the product, or was intentionally damaged by 

any person.

A.5  All warranties apply only to the original owner of the product and are not transferable or assignable to any subsequent owner or user.  You 

must retain a copy of the original product invoice to claim and validate your warranty.

A.6  All warranties apply only to the single, original vehicle installation of the product. Any removal of a product from its original vehicle or 

reinstallation of any kind voids all warranties.

Содержание 101358






















































Отзывы: