14
Covers Seat Frame IPS-Valve, switches for heating, swivel and air-conditioning
covers, lever side (5):
-
Remove seat cushion.
-
Adjust suspension to highest position and secure it with block between lower
suspension axle and front frame.
-
Press nose of shoulder adjustment lever (21) till nose of handle disengages.
-
Pull off handle (21) downwards.
-
Unscrew screw (1 front screw) and (2) number 2 top screws.
-
Undo two plastic rivets (3).
-
Fold backrest completely forwards and remove one screw (4).
-
Remove cover (5) from seat frame.
Switch for seat lowering:
-
Remove screws (7).
IPS valve (12):
-
Lift up locking tab (8) safely and Remove air pipe (9)
from “Y” connector
(10).
-
Disconnect three hoses from valve unit.
-
Undo retainers of valve and push out valve from cover (5).
Cover, opposite lever side (2):
-
Remove cover (20) in general sense of cover.
Operating unit air-conditioning:
-
Unhook switch (22) from side cover (5) and unplug connector (23).
Wire diagrams with color codes are found on Pages 42-46 for your convenience.
Содержание 101358
