2
Chapter 2 – Installation and Setup
System requirements for the switch matrix models are a computer (Pentium II or better) with
either support for USB HID or an Ethernet connection, and a power source of 110-220V
AC
(with
socket matching the plug of the power cord selected when ordering the switch matrix). To run
the GUI program a Windows operating system for either 32 or 64 bits is also required.
2.1
Software Setup
If you have had any problems installing the software, we’re here to help.
Try following these complete step-by-step instructions. If you still experience problems,
give us a call at Mini-Circuits Worldwide Technical support. It’s (718) 934-4500 or e-mail
[email protected] for North America, or go to minicircuits.com/contact/worldwide_
tech_support.html for other regional numbers and addresses
.
2.1.1
First
save all work in progress and close any other programs that may be running.
2.1.2
Next,
Insert the
Mini-Circuits
CD into the CD-ROM drive, or download the full CD
software from minicircuits.com. If installing from files downloaded from the web - unzip the
downloaded files to a temporary folder on your desktop or C: drive, then open the file folder
you created and double-click the “Install” icon.
2.1.3
If
installation from the CD does not start automatically, run
install.exe
from the <CD drive> root directory.
Figure 2.1.3
CD file listing window
Page 9 of 33
AN-49-001 Rev.: A (November 25, 2014) M149081 (R88277) File: AN-49-002(A).doc
This document and its contents are the property of Mini-Circuits
