Page 29 of 33
AN-49-001 Rev.: A (November 25, 2014) M149081 (R88277) File: AN-49-002(A).doc
This document and its contents are the property of Mini-Circuits
Figure 3.4.1:
User Switching Sequence screen
Notes:
1. Typical switching time is 25 mSec, attempting to toggle a given switch twice with too short a
delay between the commands may produce errors.
2. If time limit is set to a value which is not a multiple of sequence run time it will be rounded up
to nearest multiple.
3.4.2
User sequence graphical switch presentation
This window is opened beside the user sequence window by selecting the ‘View Switches’
option. This window shows the current state of all switches and allows you to illustrate multi
switch setups by ‘dragging’ one of the connector circles to another switch’s connector for
example 2(A) to COM(B) (see
Fig. 3.4.2a
).
Each connector can be connected to only one other connector and can not be connected to
another connector in the same switch. Adding a second line between switches to a
connector will erase the previous line and replace it with the new one.
Start and end of active signal paths are highlighted in the same color, with each signal path
using a different color while the inactive connectors will remain white.
Clicking on the tab of a connector allows you to type in a new name for the connector
instead of the default ‘1’, ‘COM’ or ‘2’.
1
18
2
17
3
16
15
4
14
5
10
6
7
8
9
11
12
13
