3.3.6
USB-1SP4T-A18
/ RC-1SP4T-A18
These models have only a single absorptive SP4T switch and thus there are no additional
configurations beyond that of an SP4T switch. The switch state can be changed either by
clicking on the buttons on the right side of the screen in
Fig. 3.3.6
(the button will change
color to indicate the current switch state) or in the user sequence window, opened by clicking
on the ‘User Sequence’ button (see
section 3.4
).
Figure 3.3.6:
USB-1SP4T-A18 main window
3.3.7
Additional configurations, not shown here
For additional configurations not mentioned here of all models, or for configurations via
Ethernet control click on the ‘User Sequence’ button to open the user sequence window.
Page 27 of 33
AN-49-001 Rev.: A (November 25, 2014) M149081 (R88277) File: AN-49-002(A).doc
This document and its contents are the property of Mini-Circuits
