3.2.5
After clicking on the search icon
The IP search will pop up with a list of
switch matrix IP addresses found and their HTTP ports on the left side of the screen, and full
details of each unit on the right. Mark the IP address you wish to use and click select. The
search window will close and the IP address will be entered in the IP address field of the
initial screen automatically.
Figure 3.2.5:
Ethernet IP search window
Notes:
1)
To refresh the list of units found click on the Search button.
2)
The search function uses ports UDP 4950 and UDP 4951 for communication, ensure
your firewall allows access to these ports.
3.2.6
After entering the IP address
enter your password if you set one (see
section
3.1.7
), select the communication protocol you wish to use (HTTP or Telnet) and click start,
the unit's main screen will open.
Figure 3.2.6:
Ethernet startup screen
Note:
changing Ethernet settings is only possible via USB control, see section 3.1.7 for details.
Page 19 of 33
AN-49-001 Rev.: A (November 25, 2014) M149081 (R88277) File: AN-49-002(A).doc
This document and its contents are the property of Mini-Circuits
