background image

Master Reset

This control will restore your detector to its 

Factory Presets

 and 

erase all

 of your User Modes, 

Discrimination Patterns and other settings you may have loaded into E-Trac over several months of 
ownership and use.  If you want to be safe, backup your settings using Xchange before performing a 
Master Reset.  If you only require a basic Reset (if you wish to cancel a Learn Edit) then turn E-Trac on and 
hold the Power button for 3 seconds.  

NB:

 It is very important to differentiate the two different Reset Options - in actual use you will be asked 

if you want to perform a Master Reset so if you find yourself at this step without meaning to its an easy 
matter of cancelling the request – doing a basic Reset you won’t be asked for approval as it’s done as 
explained above, via the Power On button.  So it’s very important to distinguish the two because you don’t 
want to erase all your saved discrimination patterns! 

But, even if you had it would not be a total loss provided you had saved all your favourite settings on your 
PC via E-Trac Xchange.  It would then be a simple matter of re-loading them via the USB cable that comes 
with E-Trac in the box. 

Other New Features 

Liquid Crystal Display 

– E-Trac’s LCD has a viewing area of 72mm x 48mm and improved resolution.  This 

provides clearer on-screen graphics and improved target identification, making detecting with E-Trac 
much easier.  More information can be displayed helping you to find the target.

Ergonomic Keypad Layout

 – the new keypad layout provides ergonomic single-handed access to all of 

E-Trac’s functions and settings so more time can be spent detecting and less time adjusting settings.

Ergonomic Handle Assembly

 – E-Trac’s new handle design gives a precisely balanced detector with a 

feel that is distinctly different and unique to E-Trac.  I will give ‘a small word to the wise’ here…allow some 
time to get used to the very different feel of E-Trac as you become accustomed to it and to help find your 
own, personal “best balance & most comfortable” position.  This will allow excellent maneuverability on 
both fast and slow sweep speeds and is very comfortable so you can keep detecting for long periods. 

Содержание E-Trac
















Отзывы: