Minebea OPT-564-71, Инструкция по эксплуатации

Страница: 15 / 18

9
Errors
Error Details
IN-1 error Indicates when no torque signal is input in measurement mode or monitor mode.
+OL error
Indicates when the input torque value exceeds [+110% of maximum display value]
or exceeds 384 kHz in measurement mode. (When 16 kHz is exceeded when F-54
= 0)
-OL error
Indicates when the input torque value is less than [-110% of maximum display
value] or is less than 96 kHz in measurement mode. (When less than 4 kHz when
F-54 = 0)
+OS error Indicates when the rotation speed exceeds 27,500 in measurement mode.
-OS error Indicates when the rotation speed is less than -27,500 in measurement mode.
EEPROM error Indicates when an EEPROM write or read error is detected.
PDO
communication
error
Indicates when a PDO communication error is detected.