Minebea CSD-401, Инструкция по эксплуатации

Страница: 67 / 150

51
Items Function No.
Setting value
Contents
RS-232C operating mode
F-47
(Valid at F-39=1)
*0
Stream (outputs synchronizing with the
display frequency.)
1
Synchronizes with the print.
(Synchronize with key, external
control input or automatic print.)
2 Command mode without address
3 Command mode with address
Communication protocol 2
RS-232C output target
F-48
(Valid at F-39=0
also F-47=1 or 2)
*0 Interlock display
1 Total weight
2 NET
3 TARE
4 Total
weight, NET, TARE
Communication protocol 2
Switchover the data format
F-49
(Valid at F-39=0)
*00
Switchover the digital format
10
0
digit: *0= format 1, 1= format 2
Setting digit of the unit
10
1
digit : *0= unit 2 digit, 1= unit 3 digit
External control input IN1
operation setting
F-60
*00 Operation OFF
1
The same operation as key
2
The same operation as key
3
The same operation as key
4
The same operation as key
5
The same operation as key
6
The same operation as key
7
Switch the display of net value
(Effective only in the measuring mode.)
8 Hold display (Level operation)
External control input IN2
operation setting
F-61 It is optional as well as F-60.
External control input IN3
operation setting
F-62 It is optional as well as F-60.
External control input IN4
operation setting
F-63 It is optional as well as F-60.
External control input IN5
operation setting
F-64 It is optional as well as F-60.
External control input IN6
operation setting
F-65 It is optional as well as F-60.
SI/ F operating set F-70
*0 Hold at it displays
1 Display unsynchronized.
For Maintenance F-90 Do not use
For Maintenance F-91 Do not use
Memory clear F-99 Set the function content is returned to setting default.
* : has been set as default.