Minebea CSD-401, Инструкция по эксплуатации

Страница: 43 / 150

27
4-6-2. Fine adjustment of zero and span
When key pressed from display,
is displayed.
In executing the zero fine adjustment, please proceed the
operation of a). In case of executing the span adjustment only,
press key, and proceed the operation of b) after the
display.
a) Fine adjustment of Zero
Press key. Display becomes .
Please set the display to [zero] after the condition which
nothing is put on the measuring point.
: Increase the measuring value. Increase continuously by
keeping key pressed.
: Decrease the measuring value. Decrease continuously
by keeping key pressed.
: Interrupts the setting, and returns to display.
: Memorizes the display value, and proceed to the next
step.
After the zero fine adjustment, press key.
Display becomes . In case of executing the fine
adjustment of span, the operation of b is proceeded.).
Otherwise, by pressing key, the operation of c) is
proceeded after the display.
b) Fine adjustment of span
Put the weight which can be put on the measuring section
under the maximum capacity.
is displayed by pressing key. [ ] is
the present measuring value, and it can be displayed up to
1/10 digit.
Please set the display to become the same value with the
weight put on the measuring section.
After the fine adjustment of span, proceeds the operation of c)
after display by pressing key.
Next page [A] Next page [B]