Minebea Intec Signum 3 Ex, Руководство по эксплуатации

Страница: 87 / 136

87 Signum 3 Ex
Care and Maintenance / Recycling
Care and
Maintenance
Service
Regular servicing by a Minebea Intec
technician will extend the service life
of your equipment and ensure its
continued weighing accuracy� Minebea
Intec offers its customers service
contracts with regular maintenance
intervals ranging from 1 month to 2
years�
The frequency of the maintenance
intervals depends on the operating
conditions and user’s tolerance
requirements�
Cleaning
!
Unplug the system from the power
supply and unplug any data cables
connected to the scale�
§
Clean the scale with a cloth lightly
moistened with soap solution�
§
Wipe down the scale with a soft,
moist cloth after cleaning�
!
Make sure that no liquid enters the
scale�
!
Do not use aggressive cleaning agents
(solvents or similar)�
Cleaning the Stainless Steel Surfaces
All stainless steel parts should be
cleaned at regular intervals� Remove the
stainless steel load plate and thoroughly
clean it separately� Use a damp cloth or
sponge to clean stainless steel parts on
the scale� You can use any commercially
available household cleaning agent that
is suitable for use on stainless steel�
Stainless steel should be cleaned simply
by rubbing� Then clean the load plate
thoroughly, making sure to remove all
residues� Use a damp cloth or sponge
to clean stainless steel parts on the
scale� After this, let the device dry� For
additional protection, protective oil may
be applied�
!
Only use solvents for cleaning stainless
steel parts�
Corrosive Environment
$ Remove all traces of corrosive
substances from the scale on a
regular basis�
Replacing the Dust Cover
> Replace damaged dust covers�
§ Place the new dust cover on the display
and control unit and press it over the
edge of the front and rear side of the
device until it is fixed in place�
Safety Inspection
If there is any indication that safe
operation of the scale is no longer
warranted, disconnect the system
from the supply voltage and secure it
against further use� For example, a safe
operation is no longer warranted if
the AC adapter has visible damage or
is no longer working� Moreover, safety
inspections are required
– The equipment has been stored
for a relatively long period under
unfavorable conditions
– The equipment has been subjected
to rough handling during shipment�
In this case, notify the Minebea Intec
Service Center�
Maintenance and repair work may be
performed only by authorized service
technicians who have access to the
required maintenance manuals and
instructions and who have participated
in the corresponding training
The duration and number of regular
safety inspections should be determined
by a qualified Minebea Intec service
technician based on specific ambient
and operating conditions (once a year
at the minimum)�
!
The seals on the device indicate that
the device may only be opened and
maintained by authorized specialist
personnel, so that the correct and safe
operation of the device is ensured and
the guarantee remains valid� If the
verification seals are damaged, the
equipment must be re-verified�
Disposal
If the packaging is no longer needed,
it can be disposed of by local waste
disposal authorities� The packaging
is made of environmentally friendly
materials that can be used as secondary
raw materials�
The equipment, including accessories and
batteries, should not be disposed of as
regular household waste� EU legislation
requires its Member States to collect
electrical and electronic equipment
and dispose of it separately from other
unsorted municipal waste with the aim of
recycling it�
In Germany and several other
countries, Minebea Intec itself assumes
responsibility for the return and
conformant disposal of its electronic and
electrical products� Such equipment may
not be thrown out with household waste
or brought to collection centers run by
local public disposal operations – not
even by small commercial operators�
For disposal in Germany and in the
other member nations of the European
Economic Area (EEA), please contact our
local service technicians or our Service
Center in Bovenden, Germany:
Minebea Intec Bovenden GmbH & Co. KG
Leinetal 2
D-37120 Bovenden, Germany
WEEE-Reg.-Nr. DE58091735
In countries that are not members of
the European Economic Area (EEA) or
where no Minebea Intec subsidiaries or
dealerships are located, please contact
your local authorities or a commercial
disposal operator�
Prior to disposal and/or scrapping of
the equipment, any batteries should
be removed and disposed of in local
collection boxes�
Minebea Intec will not take back
equipment contaminated with hazardous
materials (ABC contamination) –
either for repair or disposal� Detailed
information with service addresses
for returning your device for repair or
disposal can be found on our website
(www�minebea-intec�com) or requested
from a Minebea Intec Service Center�