Minebea Intec Signum 3 Ex, Руководство по эксплуатации

Страница: 77 / 136

77 Signum 3 Ex
Configuring Printouts Configuring Printouts
Example:
Standard printout for data output from the Counting application
Settings (different from the factory settings):
Applications: Application 1: Counting
Then access Setup: Printout: Printer 1: “Individual: print by pressing
p
”
§
Select Setup menu: Press the
k
key repeatedly until
setup
is displayed
§
Select “Config� printout:” Press the
)
key
§
Press the
k
key repeatedly until
prtpot
is displayed
§
Press the
)
key
)
1�) Press the
)
key until
7.4
appears in the display
k
2�) Press the
k
key until
7.6
appears in the display
)
3�) Press the
)
key to display
the list of print items (active
print selection)
)
4�) Press the
)
key to go to the
selection list
First printout list of selection
list
)
5�) Press the
)
key to add the
displayed print item from the
selection list to the list of print
items�
Or
k
6�) Press the
k
key to go to
the possible print items in the
selection list�
Selection of available print
items, see
setup
:
prtprot
(Settings)
k
7�) Press the
k
key until
------- appears in the display
)
8�) Press the
)
key to apply
the selection
k
9�) Press the
k
key until
ref.-gew
appears in the
display
)
10�) Press the
)
key to apply
the selection
11�) Selecting additional printout
items: see previous steps
(
12�) To complete the selection
of print items, press the
(
key until
appl
appears
in the display
13�) Press and hold the
)
key
(2–3 sec) to switch to
weighing mode
14�) Carry out weighing and then
print
p
15�) Press the
p
key to print
the results
--------------------
Printout example
wRef + 0.4000 g
blank