Minebea Intec Signum 3 Ex, Руководство по эксплуатации

Страница: 36 / 136

36 Signum 3 Ex
Operation
Example:
Numeric input of tare weight,
print the results
e
1�) Switch on the scale�
The automatic self-test runs�
When the weight readout is
shown, the scale is ready to
operate and automatically set
to zero� With no load on the
platform, you can zero the
weighing platform at any time
by pressing
(
�
250
2�) Enter the tare weight in the
current weight unit using
the keypad (in this example,
250 g)�
)
3�) Save the tare weight
4�) Place the sample (in this
example, 2 kg) in its container
on the scale�
Read the result�
L
5�) Toggle the display from net
to gross weight values�
The display shows the gross
weight (in this example, 250 g
for the container plus 2000 g
for the sample)�
L
6�) Toggle to the previous display�
p
7�) Print the results�
--------------------
G# + 2.250 kg
T + 0.000 kg
PT2 + 0.250 kg
N + 2.000 kg
--------------------
Example:
Tare the scale by placing a container on the weighing platform
e
1�) Switch on the scale�
The automatic self-test runs�
When the weight readout is
shown, the scale is ready to
operate and automatically set
to zero� With no load on the
platform, you can zero the
weighing platform at any time
by pressing
(
�
2�) Place empty container on the
platform�
)
3�) Tare the scale�
Note: If the automatic tare
function is enabled, you do
not need to press the
)
key� The tare weight is saved
automatically when you place
the container on the platform�
Wait until a zero value is
displayed together with the
NET
symbol (net weight)�
4�) Place sample on the platform
Wait until the weight unit
symbol is displayed (indicating
stability) and then read off the
weight value
Operation