manualshive.com logo in svg

Minebea Intec PR 6207, Руководство по установке

Поделиться
Скачать
Minebea Intec PR 6207 Скачать руководство пользователя страница 13

4.7 PR 6007/00 Mounting kit

4.7.1

Setting up the PR 6007/00 mounting kit

Note:

The mounting kit is

not

included in the equipment supplied with your load cell.

Order no. of PR 6007/00 mounting kit, see Chapter

11.2.1

.

The use of the PR 6007/00 mounting kit enables easy and safe suspension of the

weighing object.
The stable cover (18) protects the thin-walled bellows sheath. By turning the cover 180°,

the load application point can be either in the protected area or freely accessible.
The pre-stretched steel cable suspension puts the load in a stable position and

counteracts lateral forces and torques. Conical seat (11) and rounded washer (12) minimize

the risk of the rope (7) jamming at the suspension.
An adjustable overload protection (2, 3) protects the load cell from damage due to

overload.

4 Speciications

Beam Type Load Cell PR 6207

Minebea Intec

EN-11

Содержание PR 6207















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды