Minebea Intec PR 6207, Руководство по установке

Страница: 12 / 46

Designation Description Abbr. D1 C3 Unit
Minimum LC veriica-
tion
minimum load cell scale interval, v
min
=
E
max
/Y
Y 2778 11111
Rated output relative output at maximum capacity C
n
2 2 mV/V
Tolerance on rated
output
permissible deviation from rated out-
put C
n
d
c
<(+1.0
-0.1)
<0.1 % C
n
Zero output signal load cell output signal under unloaded
condition
S
min
0 ±1.0 0 ±1.0 % C
n
Repeatability max. change in load cell output for
repeated loading
ɛ
R
<0.03 <0.01 % C
n
Creep max. change of output signal at E
max
during 30 minutes
d
cr
<0.05 <0.017 % C
n
Non-linearity deviation from best straight line th-
rough zero
d
Lin
<0.05 <0.018 % C
n
Hysteresis max. diference in LC output between
loading and unloading
d
hy
<0.05 <0.017 % C
n
Temperature efect
on Smin
max. change of S
min
per 10 K in B
T
TK
Smin
<0.05 <0.013 % C
n
/10 K
Temperature efect
on C
max. change of C per 10 K inB
T
TK
C
<0.05 <0.008 % C
n
/10 K
Input impedance between supply terminals R
LC
350 …480 350 …480
Ω
Output impedance between measuring terminals R
O
356 ±0.2 356 ±0.2
Ω
Insulation impedance between measuring circuit and housing,
U
DC
= 100 V
R
IS
>5000 >5000
M
Ω
Recommended sup-
ply voltage
to hold the speciied performance B
u
4…12 4…12 V
Max. supply voltage permissible for continuous operation
without damage
U
max
18 18 V
Nominal ambient
temp. range
to hold the speciied performance B
T
-10…+40 -10…+40 °C
Usable ambient temp.
range
permissible for continuous operation
without damage
B
Tu
-30…+70 -30…+70 °C
Storage temperature
range
without electrical and mechanical stress B
Ti
-50…+85 -50…+85 °C
Vibration resistance resistance against oscillations
(IEC 60068-2-6-Fc)
20 g, 100 h,
10…150 Hz
Nominal delection elastic deformation under maximum ca-
pacity
S
nom
0.3…0.4 0.3…0.4 mm
Deinitions acc. to VDI/VDE 2637
The technical data given are intended solely as a product description and should not be
interpreted as guaranteed properties in the legal sense.
Beam Type Load Cell PR 6207 4 Speciications
EN-10 Minebea Intec