Minebea Intec CAW3P, Руководство по эксплуатации

Страница: 37 / 188

Entering Adjustment and Linearization Weights
Purpose Entering adjustment and linearization weights.
Procedure See also “Calibration and Adjustment“ in the chapter called “Operation“.
t
Remove the cap.
t
Slide the menu access switch to the left (= “open“ position).
t
Activate the Service mode, see “Service Mode.“
t
Select weighing platform “
WP 1
“ in the “
Device Parameters
“
menu item.
t
If the “
Internal
“ setting is not already activated (marked by “
o
“), select
the setting using the “
Q
“ or “
q
“ soft key and confirm with “
O
.“
y
The menu for the “
WP-1 INTERNAL
“ device parameters is displayed.
t
Use the “
Q
“ or “
q
“ soft key to select and open the “
Calibration/
adjustment
“ menu using “
O
.“
t
Use the “
Q
“ or “
q
“ soft key to select and use “
O
“ to open the “
Parame-
ter for external weight
“ menu.
t
The first menu item “
Cal/adj. wt.:
“ (for selecting the user-defined
calibration weight), is also accessible without activating the Service mode.
The values for the linearization weights “
Lin.-wt. 1
“ to “
Lin.-wt.
4
“ can, however, only be changed in the Service mode.
y
The current values for the user-defined calibration weight and the
4 linearization weights are displayed.
In this example, the value for the external, user-defined adjustment weight is
changed to 6.000 kg.
t
Press
6.000
and confirm with the “
l
“ soft key.
y
The “
Lin.-wt. 1
“ input field is selected.
In this example, the value for linearization weight 1 is changed to 1.500 kg.
t
Press
1.500
and confirm with the “
l
“ soft key.
y
The “
Lin.-wt. 2
“ input field is selected.
t
Enter or change all linearization weights in sequence as needed.
If you do not require all linearization positions, enter “
0.000
“ in the unused
fields to hide these lines in the display. Confirm with the “
l
“ soft key after each
entry to move to the next input field.
In the example shown here, four linearization weights have been entered
(1.5 kg, 3.0 kg, 4.5 kg and 6.0 kg).
When you close the input menu by pressing the “
o
“ soft key, the input values
are directly applied.
t
Slide the menu access switch to the right (= “closed“ position) and reattach the
cap.
Operating Instructions Combics Complete Scales 37
Configuring Weighing Platforms