![Mine Site Technologies MinePhone MP10 Скачать руководство пользователя страница 50](http://html.mh-extra.com/html/mine-site-technologies/minephone-mp10/minephone-mp10_administrators-manual_1800990050.webp)
#-- PTT Codec --------------------------------------------------
# ptt.codec is introduced in 1.4.2
# The versions earlier than 1.4.2 were hardcoded as g.711mu.
# ptt.codec need be set as g.711mu for PTT communication between
# Minephones pre-1.4.2 and post-1.4.2.
#-------------------------------------------------------------------
#ptt.codec=g.711mu
#ptt.codec=g.711a
#ptt.codec=g.729a
Emergency Broadcast
This section contains emergency broadcast channel settings. It is strongly recommended not to change
the default settings.
#-- Emergency Broadcast---------------------------------------------
# This should not be disabled, and should only changed by
# experienced administrators.
It is highly advised that all phones
# be on the same emergency channel.
#-------------------------------------------------------------------
# ptt.emergency.name=Emergency
# ptt.emergency.address=224.20.20.100
# ptt.emergency.port=9145
# ptt.p2p.address=224.20.20.80
# ptt.p2p.port=9145
# ptt.p2p.name=Peer PTT
Noise Suppression and Echo Cancellation DSP Settings
Settings for noise suppression and echo cancellation on the MinePhone are described in the table below.
#-- Noise suppression and echo cancellation DSP settings------------
#
Bottom microphone gain is an integer in range [-2dB, 26dB].
#
Top microphone gain is an integer in range [-2dB, 26dB].
#
Noise Suppression Level an integer is in range [-30dB, 0dB]
#---------------------------------------------------------------------
#audio.input.mic.gain.top=-2
#audio.input.mic.gain.bottom=-2
#audio.input.mic.gain.rsm=-2
#audio.input.noise.suppression=-18
Values
Description
Field
-2dB to 26 dB. Default = -2
Microphone gain of the MinePhone's top
microphone.
audio.input.mic.gain.top
-2dB to 26 dB. Default = -2
Microphone gain of the MinePhone's
bottom microphone.
audio.input.mic.gain.bottom
-2dB to 26 dB. Default = -2
Microphone gain when a Remote Speaker
Microphone is attached.
audio.input.mic.gain.rsm
-30dB to 0dB. By default, the noise
suppression setting is -18dB which
is suitable for most environments.
Noise suppression level ranging from
-30dB to 0B.
audio.input.noise.suppression
Revision E
50
MinePhone Administrator Guide
Trivial File Transfer Protocol (TFTP) Configuration
Содержание MinePhone MP10
