Mindman MF01 Series, Инструкция по эксплуатации

Страница: 24 / 32

22
Flashing
alternately
● [
F-91
] Power-Save Mode Selection
Select Power-Save Mode at Measurement Mode.
During the Power-Save Mode, the main display will turned off
if no buttons is pressed in 30 sec., press any keys to leave the
Power-Save Mode.
Press or button at Function Setting Mode to display
[
F-91
] [
ECo
].
● [
F-92
] External Input Selection
Accumulated flow external reset : The accumulated flow
value will reset to "0" when an external input signal is applied.
Auto-shift
: The instantaneous flow rate will regard as the
standard when the external input signal is applied. The switch
output function operates relative to its change.
Auto-shift zero : The instantaneous flow rate is reset to zero
to regard as standard when the external input signal is applied.
The switch output function operates relative to its change.
This function is only for output 1 corresponding to flow sensor
action point. When external signal is input, please connect the
input wire to GND for 30 ms or more.
Press or button at Function Setting Mode to display
[
F-92
] [
1nP
].
Power-Save Mode Selected Mode
Press button
Flashing
alternately
Power-Save Mode Selection
Press or button
to turn on the power-
save mode.
Power-save
mode "OFF"
Power-save
mode "ON"
Flashing
alternately
Flashing
alternately
F-91
Press button to return to
Function Selection Mode
* NOTE: During the Power-Save
Mode, the decimal point will flash.
NOTE
1. This function is not available with Output Specification -02 and -04.
2. When external signal is input, the instantaneous
flow rate value will be shown "
oooo
".
ECo
ECo ECo
no
no YES
ECo
DIGITAL FLOW SENSOR ( INSTRUCTION MANUAL )
MF01
How to use – Operation setting instructions
External Input Selected Mode
Press button
Flashing
alternately
External Input Selection
Press or button
to select external input
function.
r_r
r_r r_R r_0
oooo
Accumulated flow
external reset
Auto-shift Auto-shift zero
Flashing
alternately
Flashing
alternately
Flashing
alternately
F-92
Flashing
alternately
Press button to return to
Function Selection Mode
1np
1np 1np 1np
1np