Page 9
(8)
INT Button (Intensity)
–
Note: button raised to guide you in
locating button with eyes closed during session
. Use to increase/
decrease intensity of the lights in the eyeset.
(9)
CES OUTPUT Jack
– Insert CES cable into CES OUTPUT jack.
(10)
SEL Button (Select)
– Use to select session while sessions are
scanning. During a session, use to select tone – Pulsed Tone,
Binaural Beats, Chime, or to turn all tones off. Also use to turn
heartbeat sound on or off.
(11)
OMNISCREEN Jack
- Insert Omniscreen eyeset plug into
OMNISCREEN jack. Use the patch cord with the small 2.5 mm
plug.
(12)
HEADPHONE Jack
- Insert headphone plug into HEADPHONE
jack.
(13)
AUDIO IN Jack
– Use to listen to music during a session. Also
use to download or erase a session with the DAVID Session Editor.
Plug one end of the patch cord with the larger 3.5 mm plug into the
headphone output of your CD player, computer or MP3 player and
the other end into the AUDIO IN jack of the PAL36 with CES.
Figure 2 – End Panel
(14)
CES Stimulus Intensity Slider
– Use to adjust the intensity of the
CES Stimulation.
(15)
CES Power Indicator Light
– Indicates that CES is operating. If
flickering, indicates that intensity is set too high and needs to be
set to low to start CES.
