Page 11
AVE OPERATING INSTRUCTIONS
For best results, we recommend that you drink a glass of water 15
minutes before a session. Ensure that your environment is conducive to
relaxation. For example, be sure that you will not be interrupted, you are
wearing comfortable clothing, there is no excessive noise and the room is
set at a comfortable temperature. You should be sitting down in a
reclined position or lying down. Although you may keep your eyes open
or closed, most people enjoy the sessions with their eyes closed.
Turning DAVID PAL36 with CES On and Off
To turn the PAL36 with CES on, slide the power switch to the PWR
(either LIB1 or LIB2) position. To select a session from Library 1
sessions, set switch to LIB1. To select a session from Library 2 sessions,
set switch to LIB2. If using CES, slide the CES slider all the way to the
left to reset. The CES power indicator light will turn on. To turn the
PAL36 with CES off, slide the power switch to the OFF position. The
green PWR light will remain dimly lit reminding you to turn the PAL36
with CES off.
To End a Session Early Using Soft Off
TM
Press and hold the INT and VOL buttons. When you select Soft Off
TM
the indicator lights will scroll from 6 to 1 to confirm that Soft Off
TM
is in
progress. Soft Off
TM
will take 2 minutes to complete.
Battery Power Level
As soon as the PAL36 woth CES is turned on, the battery power level
will show on the lights from 1 to 6. If the power level is 1, then the
battery is too low to operate the PAL36 with CES, and it will
automatically go into standby. If the power level is 2 or less, the battery
may not have enough power for the entire session and the session will end
early. Replace the battery or use an adapter, if battery power level is at 2.
If you have the PAL36 with CES plugged into a 9-volt adapter, the power
level will always show a power level of 6.
Selecting a Session
The PAL 36 has 30 preset sessions. They are organized in two libraries
(LIB1 and LIB2). Refer to page 13 to select a preset session. As soon as
the PAL36 with CES is turned on, the last three sessions selected
displayed (including whether they were from LIB1 or LIB2). Then the
PAL36 with CES will start to scroll through each of the preset session
numbers starting with bank “A” (A1, A2, A3, etc.). After the “A”
