Minarik RG300 Series, Руководство пользователя

Страница: 30 / 64

22
Operation
Line starting and line stopping
Line starting and line stopping (applying and removing
AC line voltage) is recommended for infrequent starting and
stopping of a drive only. When AC line voltage is applied to
the drive, the motor accelerates to the speed set by the speed
adjust potentiometer. When AC line voltage is removed, the
motor coasts to a stop.
Automatic restart upon power restoration
All drives automatically run to set speed when power is
applied. Wiring a latching relay into the AC line is one way
to prevent automatic restarting following a power outage.
Regenerative deceleration
Short terminals RB1 and RB2 to
regeneratively decelerate a motor
to a stop (Figure 12). Since
terminal RB1 bypasses the MIN
SPD circuit, shorting RB1 and
RB2 will decelerate a motor to a
stop instead of minimum speed.
Calibrate the deceleration time
by adjusting the opposite-
direction acceleration trimpot.
Figure 12. Regenerative
Deceleration Switch
Connection