Minarik MMBOSS Series, Руководство пользователя

Страница: 31 / 56

23
Reversing
Warning
Do not change direction with the motor running. Frequent
changes in direction with the motor running may damage the
motor. Always wait for the motor to come to a stop before
changing direction.
NOTE
: After a one-second time delay, all drives
automatically run to set speed when power is applied and the
ENABLE input is jumpered.
To change direction, set the DIR switch to the opposite position.
To avoid motor damage from high braking currents, brake the
motor to a stop before reversing. An alternative is to close the
ENABLE/DISABLE switch or remove power to the drive before
reversing. Always wait for the motor to come to a stop before
reversing.
250-0288.qxd 6/9/00 1:05 PM Page 23