MIMAKI UJF-3042FX, Руководство по эксплуатации, Страница: 119 / 146

5-7
Troubles for which error messages are given on the LCD
5
In
Cas
e of T
rouble
Message Solution
• Turn the power of this machine off and turn it on after a while.
• If the same error message appears again, contact a distributor in your
district or our office to call for service.
• Check the weight of media (tools included) on the table is 5kg or less.
• Turn the power of this machine off and turn it on after a while.
• Execute the station maintenance and replace the filter. ( P.4-19)
• An obstacle is detected. Lower the table so that this warning disappears.
( P.3-4)
• Turn the power of this machine off and turn it on after a while.
• If the same error message appears again, contact a distributor in your
district or our office to call for service.
• Replace the ink cartridge shown on the display as soon as possible.
( P.4-4)
• Replace the ink cartridge shown on the display.
( P.4-4)
• Attach the ink cartridge(s) shown on the display.
( P.4-4)
• Execute the station maintenance, and process the waste ink tank.
( P.4-15)
Firmware Ver.1.0
Firmware Ver.1.1 and later
• Execute the station maintenance and clean or replace the wiper.
( P.4-33)
• Even if you cleaned the wiper, when Nozzle out or Ink dropping cannot be
solved, try to replace the wiper.
• Insert the ink cartridge shown on the display again. If the error is still dis-
played after this, call a distributor in your district or our office.
ERROR 4 0 1
MOTOR X
ERROR 4 0 3
X CURREN T
ERROR 4 0 2
MOTOR Y
ERROR 4 0 4
Y CURREN T
ERROR 4 2 0
Z POS I T I ON
ERROR 4 2 1
! CHECK F I L T ER
ERROR 5 0 5
! WORK H i g h
ERROR 5 0 9
HDC POSCN T
ERROR 5 0 a
Y OR I G I N
ERROR 5 0 f
L - SCA L E B L ACK
ERROR 5 1 0
X OR I G I N
ERROR 5 1 1
Z OR I G I N
ERROR 6 0 1
I NK NE AR END
ERROR 6 0 2
I NK END
ERROR 6 0 3
NO CAR T R I DGE
ERROR 6 0 4
! WS I NK T ANK CHK
.
ERROR 6 0 5
! RE P L ACE W I P ER
ERROR 6 0 5
! C L E AN I NG W I P ER
ERROR 6 0 6
WRONG CAR T R I DGE