MIMAKI UJF-3042FX Скачать руководство пользователя страница 112

Страница: 112 / 146

Refilling antifreeze mixed water

4-36

Refilling antifreeze mixed water

If water lack error is displayed, refill antifreeze mixed water.

Uncover the feed-water inlet and the air vent.

Remove all remaining water in the tank.

(1)

Remove all water in the tank with a provided syringe from
the feed-water inlet.

(2)

Put the removed water into the tank with a cap, and
discard it.

Mix antifreeze liquid with water.

(1)

Mix 1 part antifreeze liquid with 2 parts water.

(2)

Put the mixed water into a provided syringe.

Refill antifreeze liquid.

• Fill the antifreeze liquid from the feed-water inlet.
• Put the liquid of 50ml into the syringe, and put it into the device.

Repeat this 9 times to fill up (450ml).

Cover the feed-water inlet and the air vent.

feed-water inlet

air vent cover

Содержание UJF-3042FX



















































































































































Результаты поиска

Содержание UJF-3042FX

Отзывы:

MIMAKI UJF-3042FX, Руководство по эксплуатации, Страница: 112 / 146

Результаты поиска

Содержание UJF-3042FX

Отзывы: