MIMAKI JV22-130, Руководство по эксплуатации

Страница: 81 / 126

- 4.9 -
MEDIA SET
This function sets the method of medium detection.
SELECT :
During the initial operation, the device displays a menu for selection of “roll medium”
or “cut sheet medium”.
When “roll medium” is selected, only the width of the medium is detected. When “cut
sheet medium” is selected, both the width and length of the medium are detected.
WIDTH :
Select this method when a roll medium is used.
Only the width of a medium will be detected.
When the medium is set and the clam lever is pushed up, the device detects only the
medium width automatically.
VACCUM
Sets the absorbability of the medium. If the medium tends to stick to the platen, select LOW.
(STANDARD, LOW, OFF)
MM / INCH
Set a unit of set values displayed.
(MM, INCH)
STAMP
Prints the date of output and plotting condition at end of plotting.
MODE STAMP :Print the plotting condition.(ON, OFF)
TIME STAMP :Print the date of output.(ON, OFF)
AUTO CLEANING
The head is cleaned automatically. Perform cleaning for each plot to prevent plotting failures.
(ON, OFF)
HEAD HEIGHT
This function adjusts the head height.
SETUP RESET
This function resets the current plotting conditions to the factory-set plotting conditions.
Execute this function for each of the types of set plotting conditions.