MIMAKI JV22-130 Скачать руководство пользователя страница 24

Страница: 24 / 126

- 1.8 -

Capping station

The capping station consists of ink caps, wipers for cleaning the heads, etc.

Cap

It covers the nozzle so as to prevent the head nozzle from drying up.

Wiper

It is used to clean the head nozzle.

The wipers are consumable parts. If the wiper is deformed, wiper replacement is indicated on the

panel, or the medium is stained, replace the wiper with a new one.

See P.3.4 for detail procedure on replacing a wiper.

The pinch roller and The feed roller

•

While the device is not being used, keep the pinch roller in the upper posi-

tion. If the pinch roller is left lowered for an extended period of time, it can

deform and fail to securely retain the medium.

This device retains a medium with the pinch roller and the feed roller.

During plotting operation, the feed roller feeds the medium forward.

Wiper

Cap

Feed roller

Pinch roller

Содержание JV22-130































































































































Результаты поиска

Содержание JV22-130

Отзывы:

Похожие инструкции для JV22-130

Бренды по названию

Популярные бренды

MIMAKI JV22-130, Руководство по эксплуатации

Результаты поиска

Содержание JV22-130

Отзывы:

Похожие инструкции для JV22-130

Бренды по названию

Популярные бренды