MIMAKI GP-604D, Руководство по эксплуатации

Страница: 75 / 134

- 4.15 -
Change the head height (the head-gap)
When in use of a fuzzy or wrinkled garment, adjust the head height (the head-gap).
[CYCLE START] function only read the thickness of the garment, may result in touching to the head.
Two methods are available to change the head-gap.
(Initial value : 2.5 mm)
1. Press the Z keys to determine the head-gap
STEP
1. Press the Z keys [ ] and [ ] to move up and
down the head height as needed.
2. Press the [ENTER] key after determined the
height.
The menu reverts to the LOCAL mode.
2. Determine the head-gap in the FUNCTION mode
STEPS:
1. Press the [FUNCTION] key in the LOCAL mode.
2. Select the [HEAD GAP] by pressing the JOG
keys [ ] and [ ].
3. Press the [ENTER] key.
4. Select the head height by pressing the JOG
keys [ ] and [ ].
Changeable from 1.0 to 8.0 (0.1mm unit)
5. Press the [ENTER] key.
Enter the JOG mode.
<LOCAL>
Width : 610 mm
ORIGIN SET UP
Z Height 0. 0
FUNCTION
SET UP <ENT>
FUNCTION
HEAD GAP <ENT>
FUNCTION
HEAD GAP : 2.5 mm
FUNCTION
HEAD GAP : 2.0 mm