manualshive.com logo in svg

MIMAKI GP-604D, Руководство по эксплуатации

Поделиться
Скачать
MIMAKI GP-604D Скачать руководство пользователя страница 53

- 2.23 -

Turning the power off

When plotting is completed, press the power switch on the front face to turn the power off.

To turn the power off, check first whether or not there is data received and there remains data that

has not yet been output in the device.

Also, make sure that the head rests at the capping station.

• If the power is turned off while the device is engaged in plotting, the head

may fail to be retracted in the capping station.  If the head is left without

capped for an extended period of time, the nozzle will be clogged with dust.

If the power to the device is turned off without the head capped, return on

the power to the device.

1.

Turn off the power to the device.

The POWER indicator on the operation panel goes off.

2.

If you do not use the device for some time,

push the main switch located in back of the

device.

Содержание GP-604D







































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды