MIMAKI CJV30-100, Руководство по эксплуатации

Страница: 120 / 274

4-10
Notes on Register Mark Detection
Observe the following precautions on register mark detection.
• When you retry medium detection, medium skew correction, scale correction between register marks, and the
position of the origin are cleared.
• Once the cutter unit detects marks, it will set the origin at the location of TP1.
If you change the position of the origin to a different location using the jog keys, the origin at the new location will
supersede the origin at TP1.
• Locate register marks so that the line connecting the corners of the four marks forms a rectangle.
Register marks arranged unevenly can result in deviated cutting.
Notes for the combined operation of print & cut
When performing combined operation of print & cut with Raster Link Pro 4 SG, be careful to the following items:
(1) When performing combined operation of print & cut with the attached application software to this
device (Rasater Link Pro 4 SG / FineCut 7.0), the following set contents will follow the instruction of
software side. Note that the contents set in this device will be invalid.
• Register mark size
• Register mark shape
• The number of sheets
(2) The combined operation of print & cut without a register mark is not performed under the following
conditions:
• Print & cut using the take-up device
• Print & cut when “COLOR PATTERN (
P.3-28) “ of the setting mode is set to “ON”
• Other than the above conditions, there is a possibility of the cutting line being misaligned
depending on the printing data size. Therefore, it is also recommended to perform the operation
with the data which has register marks for combined operation of print & cut.