MIMAKI CG-AR, Руководство по эксплуатации

Страница: 7 / 24

Installing the Plotter Driver
7
11
Click [Install].
• Installation starts.
• The [Printer Sharing] window appears.
12
Select [Do not share this printer], then
click [Next].
• The window to finish the installation appears.
13
Click [Finish].
• A “CG-AR Series” printer is added after the installation.
Installing the Driver Using an INF File
1
Connect the plotter to a PC using a USB interface cable or LAN
cable, then set the output port.
• Please r efer to "Set the output port" (P.17) .
2
Click the Windows Start menu, then click [Settings].
• The [Windows Settings] window appears.
3
Click [Devices].
• The [Bluetooth & other devices] window appears.
4
Click [Printers & scanners] in the list on the left-hand side.
• The [Printers & scanners] window appears.
5
Click [+ Add a printer or scanner].
• A list of the available printers is displayed.