MIMAKI CG-AR, Руководство по эксплуатации

Страница: 13 / 24

Plotter Driver Setup
13
CG-AR Series Cutting Settings
This section describes the various CG-AR plotter driver settings.
Form setting
1
Click [Preferences] on the [General] tab in [Printer properties] in
"Plotter Driver Setup" - Step 6 (P.12) .
• The [Printing Preference] [Form setting] tab is displayed.
• Configure the settings to suit your particular usage requirements.
(1) Orientation
Sets whether the pattern to be cut is laid out vertically or horizontally.
(2) Rotate
Sets whether the media is used vertically or horizontally.
Setting: .................0, 90, 180, 270 degrees
(3) Mirror
Cuts with left and right reversed.
(4) Paper size
Select the media size loaded in the printer or the media size recognized by the application from the
[Paper size] list.
(5) Custom page
Allows up to four different custom media to be set.
Length ....... 50 to 15,000 mm (the maximum value will
vary depending on the machine model)
Width ......... 50 to 1,300 mm (the maximum value will
vary depending on the machine model)
The set custom media can be reset to the default val-
ues by clicking [Default].
(6) Fit to page
Enlarges or reduces the image for cutting so that it fits
on the output media.
(7) Output paper
Checking [Fit to page] allows [Output paper] to be selected.
(8) Scaling
Unchecking [Fit to page] allows [Scaling] to be selected.
If the image is enlarged beyond the media size, only the parts within the media will be cut.
• With some applications, the orientation displayed in the preview may be opposite to
the actual output when horizontal media is rotated.
(2)
(1)
(4)
(7)
(8)
(5)
(6)
(3)