MIMAKI CG-AR, Руководство по эксплуатации

Страница: 11 / 24

Outputting Using the Plotter Driver
11
Outputting Using the Plotter Driver
Output using the Windows plotter driver is dependent on the application being used.
When using the Windows plotter driver for the first time, check whether data can be output to the plotter from
the application being used.
A list of software for which output has been confirmed by Mimaki is provided in [ReadMeFirst]. (
"Please
Read Before Using the Plotter Driver" (P.3) )
Here, the procedure for outputting to the machine using Word is described as an example.
1
Launch Word.
2
Create a figure for cutting in Word.
3
Select [File] - [Print] in Word.
4
Select "MIMAKI CG-AR Series" for [Printer].
5
Click [Printer Properties].
• The [MIMAKI CG-AR Series Properties] window appears.
6
Set the cutting settings, then click [OK].
• Please refer to "CG-AR Series Cutting Settings" (P.13) .
7
Click [Print].
• Data is output to the plotter.
• The cutting sequence cannot be set in the Windows plotter driver. The cutting sequence is
dependent on the application being used. Check by actually outputting the data.