MIMAKI CG-AR, Руководство по эксплуатации

Страница: 14 / 24

Plotter Driver Setup
14
Output setting
1
Click [ Preferences ] on the [General] tab in [Printer properties] in
"Plotter Driver Setup" - Step 6 (P.12) .
2
Click the [Output setting] tab.
• Configure the settings to suit your particular usage requirements.
(1) Head Withdrawal Position
Checking this moves the head back to the specified position after cutting is complete.
(2) Head Withdrawal Position Details
Checking [Head withdrawal position] enables the
[Detail] button.
Width ...... Sets the head withdrawal position in the
head movement direction. It can be set in
the range 0 to 100 mm from the “Origin” or
the “Maximum cut data”.
Feed....... Sets the head withdrawal position in the
feed direction. It can be set in the range 0
to 100 mm from the “Origin” or the “Maxi-
mum cut data”.
Sheet feed origin renewal
Checking this sets the position to which the head was returned as the origin. This is
available only when using the MGL-IIc command.
• The [Cut condition] can be set when the command is MGL-IIc.
• If [Sheet feed origin renewal] is checked, the head movement direction withdrawal
position cannot be set.
(3)
(1)
(2)