MIMAKI CG-AR, Руководство по эксплуатации

Страница: 17 / 24

Plotter Driver Setup
17
Set the output port
When you connect the PC with the plotter via USB interface cable
1
Install "Mimaki Driver" in your PC.
• Download and install the "Mimaki Driver" from our official site ( https://mimaki.com/download/ ).
2
Connect the plotter to a PC using a USB interface cable, then turn
on the power.
3
Select the [Ports] tab.
• "Plotter Driver Setup" Step 6 (P.12)
4
Select the output port, then click
[OK].
• When you connect multiple plotters with the PC, select
different ports.
• Ports are created for each plotter. Use the
serial number indicated for the port name to
identify the ports.